Can be customized according to the samples provided by customers, or according to K7 color card, Pantone color card, PCF color card, GSB paint color card to determine the color.
This product has good rust resistance, impermeability, chemical corrosion resistance, oil resistance, etc.; For steel, stainless steel, aluminum alloy, glass fiber reinforced plastic and other materials have good adhesion; The paint film has good mechanical properties, high hardness and impact resistance. Widely used in the production of various plastic products, such as injection molding products, extruded plastic material, film, plate, pipe, etc., but also widely used in the production of plastic coatings and printing ink. .
1, before spraying should be pickling, phosphating, melting or sandblasting treatment, the surface without oil and other pollutants.
2, powder coating should be used strictly according to the batch order, different batches or different manufacturers of products can not be mixed.
3, compressed air should be oil-free, water-free, often check the working condition of the oil-water separator. .
4, the workpiece clamping should be properly connected with the ground transmission part to maintain a good connection, the fixture should be cleaned regularly to ensure good grounding.
5, the performance of the oven should be stable, in order to reduce the color difference, the temperature difference in the oven should not be greater than 5℃, in order to achieve the correct curing conditions of the coating.
1, away from the fire source, avoid direct sunlight, should be placed in good ventilation, temperature below 35℃ place;
2, avoid storage easily polluted by water, organic solvents, oil and other materials;
3, the powder is not exposed to the air after the paint is used, should be capped at any time or turn the pocket to avoid mixing with debris;
4, avoid long-term contact with the skin, powder attached to the skin should be washed with soapy water, do not use solvents;
5. The equipment used in the painting operation should be intact to eliminate static electricity;
6, to avoid the coating machine unending discharge phenomenon;
7. In the dusting room, the concentration of floating dust should be controlled below the safe concentration as far as possible to avoid the danger of dust fire and explosion.